Description
Overview
This compact UHF RFID reader and tag programmer is designed for use in any application requiring an RFID reader with a built in antenna and is packaged for the desktop. It reads tags compliant with EPC Class 1 Gen 2, ISO18000-6C as well as Alien and NXP custom command set. It also supports tag independent 128-type block write for fast encoding. Featuring an integrated circular polarized antenna, this reader provides a read range of about 1 to 12 inches from the surface of the reader depending on the tag. The desktop RFID reader is FCC Part 15 compliant. It uses USB for power supply and data exchange with a host computer.
Key Features
- Compact size, light weight
- Features an integrated circular polarized antenna
- Compliant with EPC Class 1 Gen 2, ISO18000-6C as well as Alien and NXP custom command set
- 1 to 12 inch read range
- USB port for power supply and data transfer
Technical Specifications
| Frequency | UHF 902 to 928 MHz |
| Protocols | EPC Class 1 Gen 2, ISO18000-6C Alien Custom Command: BlockReadLock() NXP custom command to control EAS bit features Tag independent 128-type (up to) block write for fast encoding. Future protocols and optional EPC features supported through firmware updates. |
| Regulatory Compliance | FCC 15.247 |
| Antenna | Circular 2 dBi |
| Read Rate | Up to 200 tag/s, 50 tag/s typical |
| Communication | USB 2.0 |
| RF Power | 10-22 dBm; 1 dBm increments |
| Read Range | 1 in-12 in: depending on tag type, settings and environmental conditions |
| Input Power | 5 V, 500 mA peak through USB 2.0 |
| Upgradeable Firmware | Yes |
| LED Indicators | Power, Command/RFID activities |
| Operating Temperature | -20 °C to 70 °C (-4 °F to 158 °F), non condensing |
| Storage Temperature | -30 °C to 85 °C (-22 °F to 185 °F), non condensing |
| Dimensions (L*W*H) | 12 cm * 8 cm * 3 cm |
| Weight | 140 g |
| Operation Environment | Indoor only |
Product Brochure
Download the brochure for this product.
